English 
Français
Deutsch
Español
Italiano
Português
日本語
한국어
Русский
Basic Info
| Model NO. | Inconel 600 |
| Special Use | High-strength Steel Plate, Wear Resistant Steel, Silicon Steel, Cold Heading Steel, Free Cutting Steel, Mold Steel |
| Application | Container Plate |
| Thickness | 0.5-100mm |
| Width | 100-2000mm |
| Length | 500-6000mm |
| Material | 201 301 304 316 316L 310S 321 410 420 430, etc. |
| Processing Service | Bending, Welding, Decoiling, Punching, Cutting |
| Transport Package | Wooden Pallet or According to Customer Request |
| Specification | 0.3-20mm or customized |
| Trademark | CJ |
| Origin | China |
| HS Code | 7505120000 |
| Production Capacity | 5000 Tons/Month |
Product Description
| Product classification:Inconel | ||||||||||||
| Material:Inconel 600 | ||||||||||||
| Corresponding Brand | ||||||||||||
| High temperature new name | High temperature old name | New name for corrosion resistance | Corrosion resistant old name | National brand number | ||||||||
| NS3102 | OCr15Ni75Fe | |||||||||||
| JIS | ASTM | UUNS,SAE | DIN | EN | ||||||||
| Inconel600 | N06600 | 726LC,2.4817 | ||||||||||
| Chemical Composition | ||||||||||||
| % | C | Si | Mn | P | S | Cr | Ni | Co | Fe | |||
| Min | 14 | allowance | 6 | |||||||||
| Max | 0.1 | 0.5 | 0.1 | 0.03 | 0.015 | 17 | 0.04 | 10 | ||||
| Physical Property | ||||||||||||
| Density g/cm³ | Magnetism | Thermal conductivity/w/(m.k) | Resistivity | Specific heat capacity | Coefficient of linear expansion | |||||||
| 100~900ºC | ºC)/(Ω.mm2/m2 | ºC)/J/(kg.k)ºC | /(10-6/k) | |||||||||
| 20~900ºC | ||||||||||||
| 8.43 | 1.03 | 443 | ||||||||||
| Temperature0/ºC | 21 | 540 | 650 | 760 | 870 | |||||||
| Modulus of elasticity | 214 | 184 | 176 | 168 | 157 | |||||||
| Thermal Conductivity | ||||||||||||
| θ/ºC | 20 | 100 | 200 | 300 | 400 | 500 | 600 | 700 | 800 | 900 | 1000 | |
| λ//(W/(mºC)) | 12.85 | 13.94 | 15.15 | 16.62 | 18.71 | 20.72 | 22.40 | 24.49 | 27.00 | 29.51 | 31.60 | |
| Coefficient of Linear Expansion | ||||||||||||
| θ/ºC | 20~200 | 20~ 00 | 20~400 | 20~500 | 20~600 | 20~700 | 20~800 | 20~1000 | ||||
| a/10-6ºC-1 | 12.35 | 12.75 | 13.10 | 13.55 | 14.50 | 15.15 | 15.70 | 16.20 | ||||
| Chemical Property | ||||||||||||
| θ/ºC | 800 | 900 | 1000 | |||||||||
| Oxidation rate/(g/m2 -h) | 0.01865 | 0.05724 | 0.13718 | |||||||||
| Mechanical Property:Performance Specified In Technical Standards | ||||||||||||
| Variety | θ/ºC | tensile property | HBS | bending test | ||||||||
| σb/MPa | OP0.2/MPa | 05/% | φ/% | |||||||||
| Bar | 20 | ≥585 | ≥240 | ≥30 | 134~217 | |||||||
| A round cake, a circular blank, or a ring | 20 | ≥520 | ≥205 | ≥35 | ≥187 | |||||||
| hot rolled plate | 20 | ≥550 | ≥240 | ≥35 | ≥40 | |||||||
| 900 | ≥95 | ≥45 | ≥40 | ≥50 | ||||||||
| cold-rolled sheet | 20 | 2550 | ≥240 | ≥30 | ||||||||
| 900 | ≥90 | ≥40 | ≥60 | |||||||||
| cold-rolled sheet | 20 | ≥550 | ≥200 | ≥30 | test | |||||||
| strip | 20 | ≥550 | ≥240 | ≥30 | ||||||||
| wire | 20 | Actual measurement | Actual measurement | Actual measurement | HV≤151 | Cold forging pass | ||||||
| Table | ||||||||||||
| Product thickness/mm | <0.25 | 0.25~1.30 | >1.30~4.00 | |||||||||
| Bending coefficient | Mutual agreement | 1 | 2 | |||||||||
You may also like
Send inquiry
Send now